2) Title :
PROTECTIVE FOOTWEAR
TESTING PROCEDURES
per CSA (Z195) and ANSI (Z41) Standards
Type : Hands-on course,
with explanation of related Physics formulas.
Duration : 4 hours.
Languages : French or
English.
Prerequisite :
- basic knowledge of the Laws of Physics (preferred);
- basic knowledge of electricity (preferred);
- knowledge of the applicable Standards.
Maximum number of participants
: 5 at a time.
Exam : N/A as mandatory
testing on samples is done during this course.
Author and Instructor :
Jean-Marc Beaudet, Eng., B. Sc. A.
Goals :
1) Allow each participant to become familiar and comfortable
with the basics of the Laws of Physics (gravity, kinetic energy,
potential energy, speed, acceleration, etc.) involved in the mechanical
performance (resistance of the protective footwear construction
to impact, at the safety box toe area) tests schedule required
to obtain and maintain the Certification
of Protective Footwear;
2) Allow each participant
to become familiar and comfortable with the basics of electricity
and high voltage (18 000 volts ac. and the CORONA phenomenon [Partial
Discharge]) involved in the dielectric strength performance (resistance
of the entire protective footwear construction to electric shocks)
tests schedule required to obtain and maintain the Certification
of Protective Footwear.
How : by using hands-on
testing, in the manufacturer's laboratory, using typical samples
(to be certified or already certified) and the manufacturer's
own testing equipment.
3) Title :
PROTECTIVE HEADWEAR
TESTING PROCEDURES
per CSA (Z94.1) and ANSI (Z89) Standards
Type : Hands-on course,
with explanation of related Physics formulas.
Duration : 4 hours.
Languages : French or
English.
Prerequisite :
- basic knowledge of the Laws of Physics (preferred);
- basic knowledge of electricity (preferred);
- knowledge of the applicable Standards.
Maximum number of participants
: 5 at a time.
Exam : N/A as mandatory
testing on samples is done during this course.
Author and Instructor : Jean-Marc
Beaudet, Eng., B. Sc. A.
Goals :
1) Allow each participant to become familiar and comfortable
with the basics of the Laws of Physics (gravity, kinetic energy,
potential energy, speed, acceleration, etc.) involved in the mechanical
performance (resistance of the entire protective headwear construction
to impact) tests schedule required to obtain and maintain the
Certification of Protective
Headwear;
2) Allow each participant
to become familiar and comfortable with the basics of electricity
and high voltage (18 000 volts ac. and the CORONA phenomenon [Partial
Discharge]) involved in the dielectric strength performance (resistance
of the entire protective headwear construction to electric shocks)
tests schedule required to obtain and maintain the Certification
of Protective Headwear.
How : by using hands-on
testing, in the manufacturer's laboratory, using typical samples
(to be certified or already certified) and the manufacturer's
own testing equipment.
4) Title :
PORTABLE LADDERS
TESTING PROCEDURES
per CSA (CAN3-Z11) and ANSI (A14.XX) Standards
Type : Hands-on course,
with explanation of related Physics formulas.
Duration : 7 hours.
Languages : French or
English.
Prerequisite :
- basic knowledge of the Laws of Physics (preferred);
- basic knowledge of Torque (preferred);
- knowledge of the applicable Standards.
Maximum number of participants
: 5 at a time.
Exam : N/A as mandatory
testing on samples is done during this course.
Author and Instructor :
Jean-Marc Beaudet, Eng., B. Sc. A.
Goal :
Allow each participant to become familiar and comfortable with
the basics of the Laws of Physics (mass, torque, energy, etc.)
involved in the mechanical performance (compression, torsion,
shear, torque, etc.) tests schedule required to obtain and maintain
the Certification of Portable
Ladders.
How : by using hands-on
testing, in the manufacturer's laboratory, using typical samples
(to be certified or already certified) and the manufacturer's
own testing equipment.
5) Title :
POLYETHYLENE
SEPTIC TANKS
TESTING PROCEDURES
per CSA (B66) Standard
Type : Hands-on course,
with explanation of related Physics formulas.
Duration : 7 hours.
Languages : French or
English.
Prerequisite :
- basic knowledge of the Laws of Physics (preferred);
- knowledge of the applicable Standards.
Maximum number of participants
: 5 at a time.
Exam : N/A as mandatory
testing on samples is done during this course.
Author and Instructor :
Jean-Marc Beaudet, Eng., B. Sc. A.
Goal :
Allow each participant to become familiar and comfortable with
the basics of the Laws of Physics (fluids, volume, flow, gravity,
mass, etc.) involved in the mechanical performance (mainly compression)
tests schedule required to obtain and maintain the Certification
of Polyethylene Septic Tanks.
How : by using hands-on
testing, in the manufacturer's laboratory, using typical samples
(to be certified or already certified) and the manufacturer's
own testing equipment.
6) Title :
CABLE TRAYS
TESTING PROCEDURES
per
CSA (C22.2 No. 126, 126.1)
and
NEMA VE-1-2002, NFPA70/NEC 2002, Sections 392.5/7
Standards
Type : Hands-on course,
with explanation of related Physics formulas.
Duration : 7 hours.
Languages : French or
English.
Prerequisite :
- basic knowledge of the Laws of Physics (preferred);
- basic knowledge of electricity (preferred);
- knowledge of the applicable Standards.
Maximum number of participants
: 5 at a time.
Exam : N/A as mandatory
testing on samples is done during this course.
Author and Instructor :
Jean-Marc Beaudet, Eng., B. Sc. A.
Goal :
Allow each participant to become familiar and comfortable with
the basics of the Laws of Physics (gravity, mass, torque, energy,
electrical continuity, etc.) involved in the mechanical performance
(mainly loading until destruction or within permanent residual
deflection allowed, bonding, etc.) tests schedule required to
obtain the Certification of
Cable Trays.
How : by using hands-on
testing, in the manufacturer's laboratory, using typical samples
(to be certified or already certified) and the manufacturer's
own testing equipment.
Other courses : Other
courses may be offered, presented by other authors, specialists
or instructors, upon special request, thanks to our network of
contacts in different fields of applications and in the scientific
arena. To discuss your needs, please contact
us.
